Download  Print this page

Kenwood WD-K10PBS User Manual Page 6

Portable base transceiver.
Hide thumbs


Do not disassemble or modify the transceiver for any reason.
Do not place the transceiver on or near airbag equipment while the
vehicle is running. When the airbag inflates, the transceiver may be
ejected and strike the driver or passengers.
Do not transmit while touching the antenna terminal or if any metallic
parts are exposed from the antenna covering.
Transmitting at such a time may result in a high-frequency burn.
If an abnormal odor or smoke is detected coming from the
transceiver, switch the transceiver power off immediately, remove
the battery pack from the transceiver, and contact your KENWOOD
Use of the transceiver while you are driving may be against traffic
laws. Please check and observe the vehicle regulations in your
Do not expose the transceiver to extremely hot or cold conditions.
Do not carry the battery pack (or battery case) with metal objects,
as they may short the battery terminals.
Danger of explosion if the battery is incorrectly replaced; replace
only with the same type.
When attaching a commercial strap to the transceiver, ensure that
the strap is durable. In addition, do not swing the transceiver around
by the strap; you may inadvertently strike and injure another person
with the transceiver.
If a commercially available neck strap is used, take care not to let
the strap get caught on nearby machine.
When operating the transceiver in areas where the air is dry, it is
easy to build up an electric charge (static electricity).
When using an earphone accessory in such conditions, it is
possible for the transceiver to send an electric shock through the
earphone and to your ear. We recommend you use only a speaker/
microphone in these conditions, to avoid electric shocks.



Table of Contents

   Also See for Kenwood WD-K10PBS

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments: