Download  Print this page

Adjusting The Receiver Volume Level; Displaying The Remaining Capacity In The Battery - Kenwood WD-K10PBS User Manual

Portable base transceiver.
Hide thumbs

Advertisement

ADJUSTING THE RECEIVER VOLUME LEVEL

Use the [J]/[K] key to adjust to an appropriate volume level.
Use the [J] key to increase the current volume level by 1.
Use the [K] key to lower the current volume level by 1.
Pressing and holding the key does not adjust the volume continuously.
Lowering the volume level temporarily (Volume
o
attenuation)
1 Press and hold the [K] key.
The volume level decreases to the value configured.
Pressing the [J] key during volume attenuation cancels the volume
attenuation and restores the original volume level.
DISPLAYING THE REMAINING CAPACITY IN THE
BATTERY
1 Press the [Power].
The battery charge LED blinks and the voice announcement is played
according to the remaining capacity in the battery.
Remaining Capacity in the
Battery
30% or more
10% or more to less than 30%
Less than 10%
Note:
When the remaining capacity in the battery is low, the Status LED
blinks in red and the battery warning tone is sounded at every 10-
second interval. Please charge the battery.
Battery
Charge LED
Blinks 3 times
Blinks 2 times
Blinks 1 time
Voice
Announcement
Battery high
Battery middle
Battery low
21

Advertisement

Chapters

Table of Contents

   Also See for Kenwood WD-K10PBS

This manual is also suitable for:

Wd-k10tr

Comments to this Manuals

Symbols: 0
Latest comments: