Making A Call - Kenwood WD-K10PBS User Manual

MAKING A CALL

Use the [PTT] key on this unit or the [PTT] key on the clip
microphone to make a call.
1 Speak into the microphone while pressing the [PTT] key.
When a clip microphone is connected, the built-in microphone on
●
this unit cannot be used.
2 Release the [PTT] key to end the call.
Operation on configuring the microphone function
o
The "PTT", "PTT Lock" and "VOX" methods of calling are available
using the [PTT] key. The method varies depending on the setting.
The operation method using the "PTT" setting is described in this
manual.
You can make a call while the [PTT] key on this unit or the
PTT
clip microphone is being pressed.
Press the [PTT] key on this unit or the clip microphone to
call. Press it again to end the call. If "PTT-Lock Delay"is
PTT Lock
configured, the call ends automatically when the duration
configured elapses.
The microphone automatically turns ON in response to
VOX audio signals. Hands-free call is possible without having to
press the [PTT] key.
Note:
"PTT" is the default setting.
●
The PTT, PTT Lock and VOX settings can be changed using the
●
"Setup menu mode". For details, refer to "Configuring each function
(Setup menu mode)".
You can also use the Programming Software WD-ZS10 to configure
the setting.
22