Certification; Table 1-12 Tso/Etso Compliance - Garmin GTX 3x5 Series Installation Manual

1.14

Certification

The GTX 3x5 meets compliance with the claimed TSO(s) when interfaced with the equipment defined in
this manual, and installed in accordance with the requirements and limitations as defined.
The Appliance Project Identifier (API) for the GTX 3x5 is GMN-01216. The API is used for project
identification with the FAA and EASA. In addition, the alpha character appended to the end of the API in
the ETSO certificate is added to supplement project identification by EASA. This alpha character does not
represent a version number. To identify appliance approvals, see applicable hardware and software
numbers.
It is the installer's responsibility to ensure the ADS-B Out system is compliant with AC 20-165 and to
ensure compatibility between the GTX 335 or GTX 345 and the ADS-B Out position source equipment.
For compatible equipment shown to be eligible for 14 CFR 91.227 compliant installations in accordance
with AC 20-165, see 14 CFR 91.227 ADS-B Out Compatible Equipment.
GTX GTX GTX
325 335 345
X TSO-C74d
TSO-C88b
X X X
ETSO-C88a
TSO-C112e
X X
ETSO-C112d
TSO-C145d
X X
ETSO-C145c1
TSO-C154c
X
ETSO-C154c
TSO-C157a
X
ETSO-C157a
TSO-C166b
X
ETSO-C166b
TSO-C166b
X
ETSO-C166b
TSO-C195a
X
ETSO-C195a
[1] With internal GPS.
[2] With optional pressure sensor module.
190-01499-02
Rev. 1

Table 1-12 TSO/ETSO Compliance

Class
TSO/ETSO and
Level
Class A
--
Class 1
Level 2es
Class B2
Class A1S
Class 1
Class B1S
Class A1S
Class C1,
C2, C3, C4
Software and CLD P/N
Software:
006-B____-00 through -0( )
006-B____-00 through -0( )
006-B____-00 through -0( )
CLDs:
006-C____-00 through -0( )
006-C____-00 through -0( )
GTX 3x5 TSO Installation Manual
Description
Main
ADS-B In
GPS
Main
ADS-B In
Page 1-12