Compressor Oil Specifications - Champion R15B Operation & Maintenance Manual

COMPRESSOR OIL SPECIFICATIONS

1. AIR COMPRESSOR
Compressors shipped on units are factory filled with ISO 100 reciprocating compressor oil. Compressors
shipped as basic (pump only) do not have any oil in the crankcase. Be sure to add oil to these pumps prior
to start-up.
It is recommended that this compressor be maintained using the ISO 100 recip oil for ambient
temperatures above 32 degrees F. This is a 30 weight, non-detergent industrial oil with rust and oxidation
inhibitors specially formulated for reciprocating compressors. Contact your distributor for information and
purchase of this oil. For temperatures below 32 degrees F, use an ISO 68 compressor oil. A separate
list of acceptable oils can be obtained from the distributor's Service Department.
NOTES:
1. Do not mix oil types, weights, or brands. Consult factory for the use of synthetic lubricants.
2. For the first 100 hours of compressor operation, a careful and regular check of the oil level should
be made. Maintain oil level at the full line.
2. ELECTRIC MOTORS
Electric motors are equipped with sealed-for-life bearings and require no additional lubrication.
13