Speed of ironer
Setting the ironer
speed
Tip: Before starting to iron, allow the roller to rotate for about
five minutes while unloaded so that the temperatures of the heater
plate and roller can equalise.
PM 1210 / PM 1214:
Symbol
Speed range
Low speed range
Medium speed range
High speed range
PM 1217:
Symbol
Speed range
Low speed range
Medium speed range
High speed range
Spin speed selection buttons
The roller speed can be set either via the spin speed selection but-
tons or alternatively via the or – buttons.
Press the . button to access the roller speed selection mode.
The button will then be highlighted with a bar underneath.
Now press one of the three spin speed selection buttons.
(For example, button)
The selected spin speed selection button will be highlighted with a
bar underneath and the ironer speed will be adopted as the button
value.
Use
m
/ min
1.5–2.2
2.3–3.2
3.3–4
m
/ min
1.5–2.4
2.5–3.4
3.5–4.5
19