BullFrog STIL7 Owner's Manual
Hide thumbs
Also See for STIL7:
- Owner's manual (72 pages) ,
- Installation manual (19 pages) ,
- Owner's manual (61 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Troubleshooting
Subscribe to Our Youtube Channel
Related Manuals for BullFrog STIL7
Summary of Contents for BullFrog STIL7
- Page 1 BULLFROG SPAS OWNERS MANUAL...
-
Page 2: Quick Reference
QUICK REFERENCE To assist you with the installation and maintenance Electrician service of your new spa, please fill out the following 1. Name: information and keep it on hand for future reference. Telephone: 2. Name: Telephone: Spa Information Concrete, Decking, and Masonry Model: 1. -
Page 3: Table Of Contents
TABLE OF CONTENTS Quick Reference: Table of Contents: Important Overview: Safety Instructions: Getting to Know Your Spa: Equipment Compartment: Filling Your Spa: STIL/A Series Touch Control Panels: R Series Spas (R600) Control Panels: X Series Spas Control Panels: JetPaks and Jets: Water Care and Chemistry: Spa Maintenance: Delivery &... -
Page 4: Important Overview
IMPORTANT OVERVIEW Congratulations on your purchase of a Bullfrog Spas A Series, R Series, STIL, or X Series hot tub†. NOTE: In this document, the terms “Spa” and “Hot Tub” are used interchangeably. Take a moment to read this manual carefully. -
Page 5: Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS Save these instructions WARNING: To Reduce the Risk of Injury: Water temperature in a spa should never exceed 104˚F Safety Instructions (40 ˚ C). Water temperatures between 100˚ F (38˚C) and 104˚F (40˚C) are considered safe for a healthy adult. Water temperature in excess of 104˚... - Page 6 Non-Approved Accessories. Using Included with the spa is a warning sign to inform users accessories not approved by Bullfrog International, LC could and guest of the risks involved with using a spa. This void your warranty or cause other problems. Please consult your authorized Bullfrog Spa dealer.
- Page 7 REDUCE THE RISK OF ELECTROCUTION REDUCE THE RISK OF ELECTROCUTION 1. NEVER PLACE AN ELECTRIC APPLIANCE WITHIN 5 FEET OF SPA 1. NEVER PLACE AN ELECTRIC APPLIANCE WITHIN 5 FEET OF SPA REDUCE THE RISK OF CHILD DROWNING 2. DO NOT INSTALL UNDER SPA SKIRT OR WITHIN AN ENCLOSURE THAT WOULD RESTRICT VENTILATION. 3.
-
Page 8: Getting To Know Your Spa
GETTING TO KNOW YOUR SPA Spa Overview [A7L Pictured] Hip & Wrist Jets Water Feature Control Valve Water Feature Stereo Speakers (Optional) Suction Fitting Comfort Pillow SnapCap Auxilliary Control Pad (A Series Only) Drain Lighted Cup holder (A Series Only) Ozone Jet Filter SnapCap Weir Door/Filter Plate... -
Page 9: Spa Overview
Spa Overview [X7L Pictured] Water Feature Control Valve Therapy Jets Comfort Pillow Water Feature Suction Fitting Neck Jets Comfort Pillow Neck Jet Control Valve Perimeter Lights Light Cup Holder Drain Ozone Jet Weir Door/Filter Plate Stereo Speakers (Optional) Foot Jets Equipment Compartment Control Pad Calf Jets... -
Page 10: Equipment Compartment
EQUIPMENT COMPARTMENT Equipment Compartment.pdf 11/28/18 10:46 AM Safety certi cate / serial number Serial number... -
Page 11: Filling Your Spa
WARNING: Make sure power is off to your spa prior to authorized Bullfrog Spas Dealer). If your water is extremely hard, following spa filling procedure. Failure to do so may result in it is preferable to either dilute the water’s hardness by blending serious injury. -
Page 12: Control System
Control System IMPORTANT: Your Bullfrog Spas spa is equipped with one of 3 types of control pads. Locate the control system on your spa by matching it with the photo provided under each control panel section and follow the specific instructions for operation of your... -
Page 13: Stil/A Series Touch Control Panels
STIL/A SERIES TOUCH CONTROL PANELS Preparation and Filling Fill the spa to its correct operating level. Be sure to open all valves in the JetPaks and all other jets in the spa before filling to allow as much air as possible to escape from the system during the filling process. - Page 14 off before priming the next pump. Once primed, allow pumps to or “Exterior” light zones. Use the associated “Settings” menu to run at high speed for a few minutes before shutting off. control interior light modes (flashing, fading, solid color) and/or colors.
- Page 15 the day and all days of the week. confirmed, the task timer will be reset. You can also use the option “Reset Reminders” to reset all the reminders. Standard - Beginner: In Standard mode the spa will heat to the set point and filter according to the spa’s standard configuration.
- Page 16 Miscellaneous setting to match the actual service availableat the installation location using the instructions above. In the Miscellaneous submenu you can change the Warm weather* and Info messages options. * Depending on the pack configuration, a code may be required to modify the low-level number.
- Page 17 by pressing the Disconnect button at the bottom of the screen. Doing so will also prevent the audio system from automatically reconnecting to this specific device until it has been reconnected using the device itself. The first time you use your Bluetooth device with an A Series or STIL Audio system you must first “pair”...
-
Page 18: Priming The Pumps
R SERIES (R800) CONTROL PANELS Priming the Pumps After initial start up, verify that the home status screen appears on the panel. Pumps must be primed directly after filling to ensure correct operation of your spa. To prime the pumps press the “Jets 1”... - Page 19 Once you have completed priming, the home status screen will revert back to the spa mode and Home/Status screen if no key display the set temperature. The system requires approximately is pressed for 60 seconds. Note that if an accessory is not present 1-2 minutes of water flowing through the heater to determine in your spa configuration, its menu will not appear.
- Page 20 Modifying Water Care Schedules stopped. The Home/Status page will return after the 30 minute standby maintenance period. To modify a Water Care mode schedule, use the lighted key Use Key 6 to Cancel the Standby function before the 30 minute period and restart the spa.
- Page 21 Configure the main window message center with the Info messages submenu. When set to “Display, all information” Audio System Controls (Optional) messages are displayed without exception. When set to “Hide” some detailed messages are not displayed when they occur to keep Press the (Settings)to access “in.stream 2”...
-
Page 22: X Series Spas Control Panels
X SERIES SPA CONTROL PANELS Priming the Pumps After initial start up, verify that the home status screen appears on the panel. Pumps must be primed directly after filling to ensure correct operation of your spa. To prime the pumps press the “Jets 1”... - Page 23 Once you have completed priming, the home status screen will to each submenu by pressing the buttons and then display the set temperature. The system requires approximately using the (Light) button to select a submenu. 1-2 minutes of water flowing through the heater to determine and display the correct water temperature.
- Page 24 Set Date and Time of Day “Economy mode” above) from Monday to Friday. Spa will heat to set point at all times on the weekend (Saturday & Sunday). Setting the correct date and time is important for settings to Default Settings: The Default Settings option will restore all function as expected.
- Page 25 Play/Pause audio: Press the Play/Pause button to start or pause modify. Use the (Light) button to select, and the the audio. buttons to move through the selections. Press the (Light) button again to confirm. Adjusting the volume: Press the Volume Up or the Volume Down key to increase or decrease the volume.
-
Page 26: Jetpaks And Jets
JETPAKS & JETS Interchanging JetPaks- Step 6: Reattach the Snap-Cap and head rest. Additional Jets A Series,R Series, and STIL In addition to the jetting options offered as part of the JetPak Step 1: Put the spa in “Hold”, this will prevent the pump(s) Therapy System, additional foot, hip, calf, wrist, and hip jets may from activating (see Control Systems). -
Page 27: Water Care And Chemistry
Beginning in 2019 all 2-filter Bullfrog Spas come equipped For all water care related questions please refer all water with an @ease-ready holder system installed in the filtration care-related questions and concerns to your local Authorized compartment. - Page 28 600 gallons. Use with the FROG @ease SmartChlor Cartridge in the FROG Step 3: Put The System To Work @ease Sanitizing System for Bullfrog Spas. Ensure all hot tub equipment is working properly. Operate the pump and filter as recommended by your hot tub manufac- turer.
- Page 29 A5L, R5L A6, A6L, R6, R6L, STIL5, X7, X7L 1. Remove the FROG @ease SmartChlor Cartridge from its A7, A7L, R8L, R7, R7L, STIL7, X8, X8L bag before proceeding. A9L, A8, A8L, R8 ®...
-
Page 30: Troubleshooting
life of the cartridge varies depending on r’s hot tub size and number of users. FROG Then push the top Holder @ease SmartChlor Cartridge will last about part of the cartridge 3-4 weeks for an average 400 gallon hot tub. in until it snaps into Drain water from cartridge to ensure it is place... - Page 31 For each additional use, test the water one additional time. operating, or use an appropriate feeding or metering device Test kits and supplies are available from your authorized Bullfrog and check chemical levels often. dealer.
-
Page 32: Freeze Protection
(909.2l) of water • Non-chlorine Shock 5 teaspoons (25ml) of per 200 gallons Your Bullfrog Spas spa may be equipped with the EOS enhanced (909.2l) of water ozone purification system. Long term maintenance of this NOTE:... -
Page 33: Spa Maintenance
After multiple cleanings, worn filter cartridges will need to be pliers if needed. replaced. To maintain warranty protection, use only genuine Bullfrog Spas filter cartridge replacements. To clean or replace your filter cartridge(s), complete the following: CAUTION: Never operate spa with the filter(s) removed. -
Page 34: Spa Shell Care
For normal cleaning, use a mild dishwashing soap, window cleaner, or other products recommended by your local authorized Bullfrog Spas Dealer. For stubborn stains, use a mild acrylic cleaner or a mild detergent. To apply these cleaners, use a soft, damp cloth or sponge. - Page 35 During periods of freezing temperatures, a spa (never petroleum based) to condition the area per your Bullfrog that has malfunctioned may be subject to damaged plumbing Spas Dealer’s instructions.
- Page 36 Do not replace the plugs or tighten the unions until the spa is de-winterized. Step 5: Clean the spa shell and JetPaks (if equipped). Step 6: Remove filter cartridge(s), clean, and reinstall. Step 7: Secure the cover to the spa utilizing the tie downs and locking system.
- Page 37 INSTALLATION & DELIVERY Step 3: Step 3: Corner – Slip the upper lip of the corner into the top Electrical Disconnect – be sure to disconnect any groove of the spa. Starting from the top force the first snap into lighting or any other electrical wiring that is mounted onto the place, if the corner has slipped down and is not flush with the door before completely removing it.
-
Page 38: Spa Location
Electrician must perform the electrical installation and GFCI test procedure. Each Bullfrog Spa is manufactured and In addition to handling the water from the spa, it is tested to a standard that provides maximum protection against recommended that the room be properly ventilated. - Page 39 When leveling your spa, there should be no or where water may accumulate it is the owner’s responsibility to voids beneath it. Contact your authorized Bullfrog Spas Dealer ensure that water will drain adequately so as not to damage spa before making any leveling adjustments.
- Page 40 Concrete Pavers proper spa-side accessories will provide just the finishing touch that you are looking for. Spa steps, benches, towel racks, planter boxes, or an outdoor fireplace are just a few of the items that can be considered when accessorizing your spa. Delivery Basics To prepare for the delivery of your spa, make sure the delivery path is clear and no obstructions are present.
- Page 41 FromBottom of Base Model A7, A7L, R7, R7L, X7, X7L 83.70 From bottom 7'4" (2.24m) x 7'4" (2.24m) of base x 36" (.91m) Model STIL7 33.00 33.00 7′-4″ (2.24m) x 7′ (2.13m) x 34″ (.86m) stub up 75.67 From bottom of base...
-
Page 42: Gfci Wiring Diagrams
Never repaired by a licensed Electrician or your authorized Bullfrog Spa use aluminum wiring from the GFCI disconnect to the spa”... - Page 43 If there is not function properly. 50A of electrical service available, an authorized Bullfrog Spa dealer or Electrician can easily convert the spa to operate on 30A For safety purposes, the location of the power outlet (where...
- Page 44 Replace the Control System Box faceplate and the equipment compartment door. The electrical hook-up is complete. Note: To conform with electrical codes, and to create a barrier against pests, any holes created in the base of your Bullfrog Spa should be fitted with an appropriate connector.
- Page 45 Connections - 0611-2210112-577 - 0611-221036-565 Hardware Setup/Wiring Diagram A Series & STIL* (ye) Connecting high voltage accessories: North American model in.yt For the connection to the 0.250 inch terminals, the high voltage accessories must be provided with female quick connect terminals, straight and non-insulated for all types of connections, including the ground. Accessories of 120 V or 240 V may be connected to the corresponding terminals of the printed circuit of the in.yt.
- Page 46 Connections - 0611-221038-567 Hardware Setup/Wiring Diagram R Series & X Series (yt) Connecting high voltage accessories: North American model in.yt For the connection to the 0.250 inch terminals, the high voltage accessories must be provided with female quick connect terminals, straight and non-insulated for all types of connections, including the ground. Accessories of 120 V or 240 V may be connected to the corresponding terminals of the printed circuit of the in.yt.
- Page 47 Connections - 0611-2210112-577 - 0611-221036-565 Hardware Setup/Wiring Diagram A9L (yt) Connecting high voltage accessories: North American model in.yt For the connection to the 0.250 inch terminals, the high voltage accessories must be provided with female quick connect terminals, straight and non-insulated for all types of connections, including the ground. Accessories of 120 V or 240 V may be connected to the corresponding terminals of the printed circuit of the in.yt.
-
Page 48: Electrical Wiring
GFCI WIRING DIAGRAMS Electrical wiring Electrical wiring: North Amercian model in.ye and in.yt Refer to wiring diagram in the enclosure box lid for more information� 240 V (4 wires) 120 V (*3 wires) * If connected to a 3 wires Note: To convert model to a 120 V system, the white (common) accessory wire must be moved�... - Page 49 Refer to the troubleshooting and error codes section of the TechBook for your spa pack system� DISPLAY MESSAGES & ERROR MESSAGES Please note that if you are in a swim spa configuration, the message may be followed by "Master" or "Slave" to designate from which pack the error is coming�...
-
Page 50: Troubleshooting Guide
Solution: Turn on or reset the GFCI circuit breaker. If this does not solve the problem, have a qualified Electrician check the electrical service. Cause #2: The 20 or 30A fuse, depending on the system, has blown. Solution: Contact your authorized Bullfrog Spas Dealer. GFCI breaker trips repeatedly: Cause #1: Improper wiring to spa or GFCI breaker is defective. - Page 51 A Series & STIL Bullfrog International, LC (“Bullfrog”) extends warranty coverage solely to the end-user purchaser (“Owner”) of any STIL or A Series or Bull- frog Spa manufactured on or after January, 2017 for 2017 and later models installed for residential use in the United States or Canada.
-
Page 52: Limited Warranty
This Limited Warranty gives you specifi c legal rights. You may also have other rights which vary from state to state. Some states do This Bullfrog Spa limited warranty is void if any of the following occur: not allow limitations on how long an implied warranty lasts, so this limitation may not apply to you. - Page 53 R Series Bullfrog International, LC (“Bullfrog”) extends warranty coverage solely to the end-user purchaser (“Owner”) of any R Series Bullfrog Spa manufactured on or after January, 2017 for 2017 and later models installed for residential use in the United States or Canada.
- Page 54 This Limited Warranty gives you specifi c legal rights. You may also have other rights which vary from state to state. Some states do This Bullfrog Spa limited warranty is void if any of the following occur: not allow limitations on how long an implied warranty lasts, so this limitation may not apply to you.
- Page 55 LIMITED WARRANTY X Series Bullfrog International, LC (“Bullfrog”) extends warranty coverage solely to the original end-user purchaser (“Owner”) of any X Series Bullfrog Spa installed for residential use in the United States or Canada. 3 year Warranty 3 year Warranty...
- Page 56 MANNER WHATSOEVER. the replacement product and delivery will be the responsibility of the spa owner. Bullfrog reserves the right to use either new or reconditioned replacements components. In some situations, the servicing dealer may charge a reasonable travel mileage fee. Any...
- Page 58 Bullfrog International, LC 668 W. 14600 S. Bluffdale, UT 84065 T: 801.565.8111 F: 801.565.8333 E: info@bullfrogspas.com v 5.1.5 Register your spa online by visiting: bullfrogspas.com/warranty-registration North America 2019 Bullfrog International LC...
Need help?
Do you have a question about the STIL7 and is the answer not in the manual?
Questions and answers
How far should you make your bullfrog hot tub?
The BullFrog STIL7 hot tub must be installed no closer than the minimum allowable distance specified by national and local wiring rules.
This answer is automatically generated
Half of my Bullfrog Spa X6L doesn’t pump. any water.
How full should you keep the hot tub(water level)