Editing Operation Errors - Sony RM-PP1 Operation Manual

Error Messages

Editing Operation Errors

Error code Message
E101 P-REMOTE DISABLE
E121 R-REMOTE DISABLE
E102 P-VTR HARD ERROR
E122 R-VTR HARD ERROR
E103 REF MISSING
E123 R-REF MISSING
E104 P-CASSETTE OUT
E124 R-CASSETTE OUT
E105 P-TAPE LENGTH SHORT
E125 R-TAPE LENGTH SHORT
E106 P-VTR CNTL T/O
E126 R-VTR CNTL T/O
E107 REC INHIBIT
E108 PLY DEVICE TYPE ERR
E128 REC DEVICE TYPE ERR
E109 P-DF MODE ERROR
E129 R-DF MODE ERROR
E110 P-SYNC PLAY MISS
E130 R-SYNC PLAY MISS
E111 P-CUEUP TIME OUT
16
Cause
Player 9-pin status sense data error.
Remote disable detected.
Recorder 9-pin remote disabled.
Player VTR hardware error detected.
Recorder VTR hardware error detected. Check the recorder VTR state.
Reference signal connection trouble
Reference signal connection trouble
• Player 9-pin status sense data error.
• Cassette out detected.
• Recorder 9-pin status sense data
error.
• Cassette out detected.
• Player 9-pin status sense data
error.
• Invalid cassette type
• Recorder 9-pin status sense data
error.
• Invalid cassette type
Player 9-pin control time out
Recorder 9-pin control time out
Recorder 9-pin status sense data
error, rec inhibit detected.
Player VTR device type error
Recorder VTR device type error
Operation error. Different DF mode
between menu setting and timecode
recorded on the cassette in player.
Operation error. Different DF mode
between menu setting and timecode
recorded on the cassette in recorder.
• VTR setting error
• VTR error
• 9-pin communications error
• VTR setting error
• VTR error
• 9-pin communications error
• VTR setting error
• VTR error
• 9-pin communications error
Steps to take
Check the player 9-pin remote control
mode.
Check the recorder 9-pin remote control
mode.
Check the player VTR state.
Check that reference video signals are
connected to RM-PP1.
Check that reference video signals are
connected to recorder VTR.
Check the cassette in player VTR.
Check the cassette in recorder VTR.
Check the player VTR and tape length.
Check the recorder VTR and tape
length.
Check the player VTR.
Check the recorder VTR.
Check the REC INHIBIT setting of
recorder VTR and cassette.
Check the player VTR type.
Note
New VTRs may fail to be recognized in
the device type check.
Check to make sure that the recorder
VTR is a play-only device.
Note
New VTRs may fail to be recognized in
the device type check.
Check the player DF mode setting in
RM-PP1 menu.
Check the recorder DF mode setting in
RM-PP1 menu.
• Check the settings for preroll time, edit
delay, etc.
• Check that there is no trouble with the
VTR.
• Check the settings for preroll time, edit
delay, etc.
• Check that there is no trouble with the
VTR.
Check the player edit point timecode.