General Information - NetterVibration NTP Series Operating Instructions Manual

General information

1 General information
Before installing the NTP read these instructions carefully. It is the basis
Use and
for any action when dealing with the NTP, and may be used for training
storage
purposes. The instructions should be subsequently stored at the operation
site.
Target group The target group for these instructions is technical staff, who have basic
knowledge in pneumatics and mechanics.
Therefore, only staff who are trained in these fields may work on the NTP.
The NTP may only be installed, put into operation, maintained, troubleshot
and disassembled by persons authorised by the operator.
Copyright This documentation is protected by copyright.
NetterVibration reserves all rights such as translations, reprinting and re-
production of the instructions, as well as parts thereof.
Limitation of All technical information, data and instructions for installation, operation
liability and maintenance in these instructions are based on the latest information
available at the time of printing and take our past experience to the best of
our knowledge into account.
No claims can be derived from the information, illustrations and descrip-
tions in these operating instructions.
The manufacturer does not assume liability for damages resulting from:
• failure to observe the instructions,
• improper use,
• unauthorised repairs,
• technical modifications,
• use of non-permissible spare parts.
Translations are made to the best of our knowledge.
NetterVibration does not assume liability for translation errors, even if the
translation was made by us or on our behalf. Only the original German text
remains binding.
Directives / The pneumatic linear vibrators of the series NTP comply with the EC Ma-
standards chinery Directive 2006/42/EC.
observed
In particular, the standard EN ISO 12100 has been observed.
3