How The System Works - Intec Turbo Force Hp3 40009 00 Instruction Manual

Insulation blowing machine
Table of Contents

Advertisement

How the System Works

OVERVIEW: Cellulose, Fiberglass, or Stone Wool insulation is loaded into the hopper. The insulation
goes thru or under the Breaker Bar. The agitator breaks-up and conditions the insulation for proper
density while also sweeping the insulation into the airlock. The airlock transports the insulation into
the airstream created by the blower system. Insulation is discharged from the airlock, through the
machine outlet, and into the hose. The insulation is
further conditioned as it travels through the hose.
An introduction to key components of the system
follows:
Electrical Panel: The electrical panel, combined with
the wireless remote, provides operation of the
machine.
Loading Platform: The loading platform acts as a shelf
to support the bag of insulation being loaded into the
hopper.
Breaker Bar: The breaker bar is used to slice through
cellulose resulting in enhanced hopper utilization.
When using stabilized cellulose, fiberglass, or stone
wool, move the breaker bar up to its highest position
(or remove bar from system) so product does not
contact bar when being loaded into hopper.
Hopper: The hopper contains the insulation being fed into the agitators.
Filters: Ensure clean air is being used for blower intake and cooling.
Agitators: The agitators condition the fibrous insulation. The configuration of the agitators enable
high production rates and appropriate insulation conditioning. The agitators also transport the
insulation into the airlock.
Slide Gate: The slide gate is between the agitators and the airlock. The slide gate allows insulation to
fall into the airlock. The slide gate is opened fully during typical operation. Close the gate slightly to
increase the conditioning of the insulation and alter ratio of insulation to airflow.
Airlock: The airlock transfers the insulation from the agitation system into the airstream without
coming into contact with the blower. Insulation is discharged from the airlock into the hose.
netzerotools.com
netzerotools.com
TURBO FORCE Instruction Manual
|
4

Advertisement

Table of Contents
loading

Table of Contents