Intec Turbo Force Hp3 40009 00 Instruction Manual page 10

i. Note: It is typical to place the Auxiliary Blower Circuit Breaker in the 'off'
position when using the Variable Speed.
b. Adjust the Variable Speed Setting to desired setting ranging from 100% to near 0%.
Note 1: To obtain maximum blower velocity and pressure, place the Variable Speed control in
the off position. Placing the Variable Speed in the 'off' position provides more power to your
system's blowers when compared to having the Variable Speed 'on' and Variable Speed Setting
at 100%.
netzerotools.com
netzerotools.com
TURBO FORCE Instruction Manual
| 9