Figure 10- Shake Mouse To Enter Command Mode; Figure 11- Osd Menu For The Splitmux - NTI RACKMUX Series Installation Manual

Rackmount kvm drawer with built-in quad screen multiviewer and usb kvm switch

Hide thumbs Also See for RACKMUX Series:

Table of Contents

NTI RACKMUX-D17HR-N-SUSBHD4 RACKMOUNT DRAWER WITH QUAD SCREEN MULTIVIEWER

To control the SPLITMUX using the touchpad mouse, move your finger on the pad from side-to-side rapidly.

This motion will

place the SPLITMUX in Command Mode. While in Command Mode, all 3 status lights on the keyboard will illuminate to indicate

that Command Mode is enabled.

The keyboard functions described on page 14 will be active while in Command Mode.

Figure 10- Shake mouse to enter Command Mode

While in Command Mode, Right-click the mouse to open the OSD menu.

To exit the OSD menu, Right-click the mouse once

more.

To exit Command Mode after closing the OSD menu, either Left-click the mouse or press <Esc> on the keyboard.

For more on using the touchpad (mouse) to control the OSD menu, see page 57 of the SPLITMUX-USBHD-4RT Quad Screen

Video Splitter manual.

Table of Contents

Rackmux-d17hr-n-susbhd4