Main Unit - Sanyo ECD-T1540 Operating Manual

4. Ground Wire (Black)
• Connect this wire to the vehicle chassis.
5. Power Antenna/Amplifier Turn On (Blue/Red)
• Connect this wire to the control terminal of a Power Antenna or an external amplifier.
• When not using a Power Antenna or an external amplifier, this wire is not connected.
6. I.R Remote Sensor Socket
• Connect a remote IR sensor to I.R remote sensor socket to use with the corresponding
remote control and to extend range of remote control.
REMOTE IR SENSOR
7. CD Changer and Sirius Receiving Connector Socket
• Connect a CD changer to the CD changer and Sirius Receiving Connector socket
• Connect a Sirius module to the CD changer and Sirius Receiving Connector socket
(see separat e instruction booklet on Sirius Radio operation)
• Connect a Sirius module and a CD changer to the CD changer and Sirius Receiving
Connector socket (see separate instruction booklet on Sirius Radio operation)

MAIN UNIT

(OPTIONAL)
MAIN UNIT
(sold separately)
CDC
MAIN UNIT
(Sirius tuner module sold separately)
SIRIUS MODULE
MAIN UNIT
SIRIUS MODULE
(Sirius tuner module and CD changer sold separately)
(BLACK)
I.R REMOTE SENSOR SOCKET
CDC
21