Fitting And Removing The Hammock; Adjusting The Angle Of The Hammock; Using The Safety Armrest; Using The Hood - JANE Crosswalk Instructions Manual

E. FITTING AND REMOVING THE HAMMOCK
Your CROSSWALK is fitted with the pro-fix system. With this system,
the CROSSWALK hammock can be attached perfectly to the chassis.
What's more, the hammock is reversible so it can be positioned fa-
8
cing you or facing forwards.
To take the hammock off, simultaneously pull the unlocking levers
situated on both sides of the hammock.
!
WARNING: Do not do this while the baby is in the seat.
F. ADJUSTING THE ANGLE OF THE HAMMOCK
You can recline the hammock, to carry the baby in the most comfor-
table position at all times.
To lower the backrest take hold of the strap found on the back, with
the red logo, and pull it downwards to the required position.
To raise the backrest pull the strap with the black logo upwards.
10
.b
WARNING: The green point is the position for use, P1 and P2 are
!
only to make the folding procedure easier, do not use them
when your child is in the pushchair.
28
EN
IM 1683.02 CROSSWALK 27-10-16 adv.indd 28
8
- .a
9
10
.a
11
G. USING THE SAFETY ARMREST
The safety armrest is designed to fit into the slots on the hammock.
If required it is possible to release one side of the armrest and it will
still be completely articulated by the other side. There are buttons
12
on the lower part to do this. -
! WARNING: The child should be kept away from the mobile parts
when the responsible adult is handling these. The appearance
of cutting, compression and pinch points are inevitable during
these operations.
WARNING: Never hold the pram or the hammock by the protec-
!
tion bar, it is not a carrying handle.
H. USING THE HOOD
To fasten the hood onto the frame of the hammock, slide it
from the top down to the corresponding slots on the central
13 13
part. -
.a
Use the zip on the hood to attach it to the frame.
12
. a
27/10/16 11:29