Plotter Circuit (Ndb-34A) (Option) - JRC JMA-5312-6/6HS Installation Manual

3.15
Install the plotter circuit in the radar process unit according to the procedures below:
(1) Remove the radar process unit cabinet cover, loosen the screws that mount the terminal board to the
cabinet, and remove the terminal board from the radar process unit cabinet.
(2) Connect the P4901 side of the cable (H-7ZCRD0934) attached to the plotter circuit to the plotter circuit's
connector J4901.
(3) Connect the P4407 side of the cable (H-7ZCRD0934) attached to the plotter circuit to the radar process
unit's radar processing board J4407.
PLOTTER CIRCUIT (NDB-34A)
(OPTION)
3-27