JRC JMA-5312-6/6HS Installation Manual page 82

Wiring A
W/G G W/O B W/B O W/BR BR
Untwist the core wires and straighten each wire.
After straightening, arrange the core wires so that the wires
are aligned in the wiring order.
NOTE: The picture shows the order of "Wiring A."
The cable alignment from pin No.1 to No.8 (left to right)
W : White, G : Green, O : Orange, B : Blue, BR : Brown
PIN
1 2 3
TX+ TX- RX+
Wiling A-Wiling A : Straight cable
Gather all the core wires with maintaining the order.
Cut off the core wires at 16 mm from the sheath.
Useful tip: First, cut them 1 to 3 mm longer. Then, adjust by
inserting the connector.
3-53
4 5 6
RX-
7 8