Installation Of The Power Cable (Cfq-5436) - JRC JMA-5312-6/6HS Installation Manual

3.4
INSTALLATION OF THE POWER CABLE
(CFQ-5436)
This radar equipment comes with 5-m-long cables with a connector.
1) Processing cables
Process a cable without the Model CFQ-5436 connector, as shown in the figure.
Wiring table of the cable CFQ-5436
Color Number of wires /
diameter(mm)
Red 50/0.18
Red 50/0.18
Red 50/0.18
Black 50/0.18
Black 50/0.18
Black 50/0.18
3-4
Cross-sectional Polarity
area(mm)
1.25 +
1.25 +
1.25 +
1.25
－
1.25
－
1.25
－
Cable processing procedure
1. Crimp three black cables
together.
2. Crimp three red cables
together.
3. Connect the shield.
Connect red cables to the
positive (+) side of the ship's
mains, black cables to the
negative (-) side of the ship's
mains, and ground the shield
to the hull.
3