Photron FASTCAM ultima SE User Manual page 28

Live Live
Press the Live button to place the FASTCAM ultima SE in live mode. The LED Press the Live button to place the FASTCAM ultima SE in live mode. The LED
above the button will illuminate to indicate that the processor is in live mode. Press above the button will illuminate to indicate that the processor is in live mode. Press
the Live button again to take the processor out of live mode. The last image taken by the Live button again to take the processor out of live mode. The last image taken by
the Imager will remain on the video monitor after live is turned off. the Imager will remain on the video monitor after live is turned off.
When the FASTCAM ultima SE is in live mode, pictures from the Imager are dis- When the FASTCAM ultima SE is in live mode, pictures from the Imager are dis-
played on the video monitor so that you can adjust the imager lens, tripod, and the played on the video monitor so that you can adjust the imager lens, tripod, and the
lighting for best results. The picture on the monitor is accurate as far as composition, lighting for best results. The picture on the monitor is accurate as far as composition,
focus and exposure are concerned. The images recorded by your FASTCAM ultima focus and exposure are concerned. The images recorded by your FASTCAM ultima
SE will be as they appear on the monitor in live mode. SE will be as they appear on the monitor in live mode.
NOTE NOTE
The Playback controls are disabled as long as the processor is in live mode. Verify that the The Playback controls are disabled as long as the processor is in live mode. Verify that the
Live LED is not illuminated before trying to use the Playback controls. Live LED is not illuminated before trying to use the Playback controls.
LIVE
3-2 3-2