Photron FASTCAM ultima SE User Manual page 41

Table of Contents

D i s p l a y M o d e

1. GAMMA CORRECTION

A gamma value of 1.0 applies no black stretch to the video and a value of 0.6 applies

black stretch to the video sufficient for most video monitors.

2. CAMERA GAIN

There are two settings for camera gain "0 dB" and "6 dB." Setting the camera gain

to "6 dB" increases the camera sensitivity one f-stop with a slight increase in video

noise.

3. FF FR SPEED

Set the speed multiplier for fast forward and fast reverse play modes. The multiplier

can be set to "10" or "100." For example, if the display rate indicates 30 fps, with the

multiplier set to "10," the FF rate will be 300 fps

4. SYNC SELECT

Selects the frame synchronizing source to be internal "Int" or external "Ext." When

"Ext" is selected the processor uses the signal received via the EXT IN BNC con-

nector to start each frame of the recording.

5. STA A TUS

5. ST

TUS

Opens another page with information about the FASTCAM ultima SE DIP switch

settings that includes; memory, Ext Out settings, Trigger, and SCSI ID number.

6. RESERVE

Has no function at this time.

3-15

Table of Contents