Gatekeeper Systems Fleet Safety, Security and Tracking Solutions G4-304SD1 User Manual & Installation Manual page 97

G4-304SD1 User Manual & Install Guide
Notes on Record Mode –
Sub Record
Sub Record – record a copy of the

video from selected channels to the
specified secondary storage, at a
separately configured (usually lower)
resolution and quality.
Mirror Record – record a copy of the

video from selected channels to the
specified secondary storage, using the
same resolution and quality as the
main recording.
Alarm Backup – record only the

alarm-triggered video to the specified
secondary storage.
None – Use this setting for sequential

recording. If two SD cards are inserted
into the G4-304SD1, once card 1 is full
of data card two will begin recording.
Please note that approximately 15
seconds of identical video will be on
both sd cards during the transition
from card 1 to card 2.
DEFAULT SETTINGS:
Mirror Record

If the Record Mode is set to Sub Record, then
you may click on the ( Setup ) button to
configure the quality and resolution of the
recorded video to be stored to the secondary
storage. This configuration needs to be done
for each individual camera channel.
The following options will be on the Substream
Setup screen:
Channel – drop list to select the

particular channel to configure. When
a channel
corresponding recording settings for
that channel will be displayed for
viewing and editing.
Enable – checkbox, if selected, would

enable the substream recording for
this channel. If unselected, would mean
that video from this channel would not
be recorded and stored as part of the
substream.
Audio – checkbox, if selected, would

include audio into the recording. If
is selected, the
97 of 149