Gatekeeper Systems Fleet Safety, Security and Tracking Solutions G4-304SD1 User Manual & Installation Manual page 133

G4-304SD1 User Manual & Install Guide
Choose Channel – drop list to select the particular channel to configure. When a channel is

selected, the corresponding recording settings for that channel will be displayed for viewing
and editing.
Enable Channel – checkbox, if selected, would enable the substream recording on this channel.

If unselected, would mean that video from this channel would not be recorded and stored as
part of the substream.
Enable Audio – checkbox, if selected, would include audio into the recording. If unselected,

there would be no audio recorded for this channel.
Choose Resolution – drop list to select the resolution to record this channel at. Available

resolution options are QCIF (176x120), CIF (352x240), HD1 (704x240).
Choose Frame Rate – drop list allowing you to select the frame rate (in terms of frames per

second) that you would like to record at.
Choose Quality – drop list allowing you to select the encoding quality (on a scale of 1 to 8 –

where 1 is best).
Select Copy To Channel – this feature allows you to copy the current channel's substream

recording settings directly to another channel, thus allowing you to easily and quickly replicate
the substream recording settings across channels. Once you have selected the channel to copy
to, click on the ( Copy ) button to make the copy.
Copy Settings – click the ( Copy ) button to copy the current settings to the selected channel.

Save Settings – click the ( OK ) button to save the current settings for the channel.

Back to Previous – click the ( Cancel ) button to exit back to the previous screen without

saving.
133 of 149