Gatekeeper Systems Fleet Safety, Security and Tracking Solutions G4-304SD1 User Manual & Installation Manual page 62

G4-304SD1 User Manual & Install Guide
Scroll Page: Some pages will have many configuration settings that cannot be listed on the

screen all at once. The ( ^ ) and ( v ) buttons allow you to scroll up and down in order to access
all the settings available on the page.
Reset to Defaults: Click the ( Default ) button to reset the settings on the current page to the

factory defaults.
Save Changes: Click the ( Save ) button to save any changes that you have made to the settings

on the page.
If you navigate away from the current page/tab without saving, any changes that you
have made to the settings will be discarded.
Please note that your configuration settings have been set by Gatekeeper Systems
engineers to meet your specific deployment requirements. Do not reset to factory
defaults or change the settings unless you fully understand the changes you are
making, or as directed by Gatekeeper Systems.
Data Entry Interfaces of the Configuration Menu System
Component
Button
Checkbox
Radio Button
Clicking any button will either perform an action, or advance you to
the next step in the process.
Checkboxes allow you to toggle an item – clicking on it will select it,
and clicking on a selected item will deselect it. If the checkbox is
checked (has a checkmark in the box), then the item next to the
checkbox is selected. An empty box (no checkmark) means the item is
not selected. Multiple selections are allowed.
Radio buttons allow you to make one selection from among a group
of choices. Clicking on the radio button will select it (marked circle).
Clicking on any other item in the group will select that item, and
unselect the first item. Only one item can be selected at a time.
Description
62 of 149