Gatekeeper Systems Fleet Safety, Security and Tracking Solutions G4-304SD1 User Manual & Installation Manual page 108

G4-304SD1 User Manual & Install Guide
Speed
Navigation
Unit
Source
Navigation Mode
Drop list allowing the user to set the
measurement unit for the speed:
KM/H

MPH

Notes:
- Please set the preferred speed measurement
unit used in your region of operations.
- Fleets operating in North America will
typically use MPH.
- Fleets operating in most other parts of the
world (including Canada) where the metric
system is adopted will typically choose
KM/H.
DEFAULT SETTINGS:
MPH

Drop list allowing the user to set the source for
the speed measurement:
Satellite

Pulse

Notes:
- If the measurement unit is set to Pulse, you
will also need to select the calibration mode
and perform a manual calibration.
- Pulse mode is currently unsupported, and
Gatekeeper Systems recommends the use of
Satellite for this setting.
DEFAULT SETTINGS:
Satellite

Drop list for setting the navigation mode:
GPS

Notes:
- Currently, this is the only available setting.
DEFAULT SETTINGS:
GPS

108 of 149