Gatekeeper Systems Fleet Safety, Security and Tracking Solutions G4-304SD1 User Manual & Installation Manual page 125

G4-304SD1 User Manual & Install Guide
Calibrate
selected cameras on-screen when the
alarm occurs.
None : Not displayed.
Single : Display 1 camera.
Quad : Display 4 cameras.
If Single (1x1) or Quad (2x2) display is
selected, the ( Setup ) button allows
you to select the layout of the channels
to be displayed on-screen.
The drop lists are shown on-screen
accordingly to the grid layout mode
selected. You can easily choose each
individual camera channel to be
displayed in the selected grid segment
visually. If you have less cameras than
available grid segments, then those
segments associated with an actual
camera will be displayed as a black box
PB Alarm Duration – numeric text

field to set the duration of the video
playback (in seconds) when the alarm
occurs.
Alarm Snap – checkbox – if selected,

when the alarm occurs, the device will
take snap shots using the selected
cameras.
DEFAULT SETTINGS:
Disabled.
Click the ( Calibrate ) button to calibrate the
device accelerometer.
DEFAULT SETTINGS:
Disabled.
125 of 149