Casio XJ-UT312WN User Manual page 62

Use this menu item:
3
Network Settings* 1
Network Settings 3
Wireless LAN Function
3
1
Network Settings*
Network Settings 3
Remote On
3
1
Network Settings*
Network Settings 3
PJLink Authentication
3
1
Network Settings*
Network Settings 3
Update Network Settings
3
1
Network Settings*
Network Settings 3
Initialize Network Settings
Operational Info
Restore All Defaults 3
Unit Operating Time
Restore All Defaults 3
Restore All Defaults
*1 For details about how to configure the settings of the "Network Settings" menu items, refer to the
separate "Network Function Guide".
To do this:
Toggle the projector's wireless LAN function between "Enable"* and "Disable".
Specify whether the projector can be turned on via wired LAN while the projector is
in standby (projector off with power being supplied).
Enable: Remote on enabled.
Disable*: Remote on disabled.
Projector standby power consumption depends on whether or not "Remote On" is
enabled. For information about power consumption in each standby state, see
"Specifications" (page 83).
Enable or disable PJLink connection authentication. Initial default setting: Enable.
Apply changes to the "Network Settings 3 Network Settings" menu items to
projector settings.
Return network settings to their initial factory defaults.
Display the projector information below.
Input Signal, Signal Name, Resolution, Horizontal Frequency, Vertical Frequency,
Scan System, Audio Input, Projector ID, Light Time, Version (projector ROM version),
Board Number (unique board number of each product)
Display the cumulative operating time of this unit.
This time cannot be initialized.
Initialize all Setup Menu item settings, except for those below.
Language, Power On Password, Network Setting Password, Network Settings, Light
Time, Unit Operating Time
Note
 A user logo image that has been transferred to the projector (page 32) is not
deleted by a "Restore All Defaults" operation.
62