Connecting a Microphone (XJ-UT Series, XJ-F21XN, XJ-F211WN)
Connecting a microphone to the projector's MIC terminal makes it possible to output microphone
input through the projector's speaker.
MIC terminal
XJ-UT Series
Use this terminal to connect a dynamic microphone.
Plug-in power type microphones are not supported.
Connecting to a Network with a LAN Cable (Network Models
Only)
If you have a network model projector, you can use a LAN cable to connect it to the network hub or
another device of an existing network. Use a 100BASE-TX or 10BASE-T standard Category 5 or higher
LAN cable for connection. Use of a shielded (STP) cable is recommended.
LAN terminal
XJ-UT312WN, XJ-UT352WN
Projector Terminal
LAN
After connecting the projector to a network, you will be able to project the screen of any computer on
the network. You also will be able to control the projector and configure its settings from a computer.
For details, see the separate "Network Function Guide".
MIC terminal
XJ-F21XN, XJ-F211WN
MIC terminal
Mini jack
LAN terminal
XJ-F21XN, XJ-F211WN
Connection Cable
RJ-45
LAN cable
31
Other Device Terminal
LAN terminal (RJ-45)
RJ-45