Casio XJ-UT312WN User Manual page 61

Use this menu item:
Option Settings 2 3
Control Panel Lock
Option Settings 2 3
Standby RGB/Audio
Option Settings 2 3
Closed Caption (V)
Option Settings 2 3
Timer Type
Option Settings 2 3
Timer Function
Option Settings 2 3
Microphone Input Level
(XJ-UT Series/XJ-F21XN/
XJ-F211WN)
Option Settings 2 3
Restore Menu Defaults
3
1
Network Settings*
Wired LAN info
3
1
Network Settings*
Wireless LAN Info
3
1
Network Settings*
Network Settings 3
IP Setting(LAN1)
To do this:
Disable projector unit key operations.
See "Control Panel Lock" (page 51) for more information.
Specify output of projector image input to the MONITOR OUT terminal and input
audio to the AUDIO OUT terminal while the projector is in standby (projector off with
power being supplied). The output image is fixed as the video signal from the
projector COMPUTER IN 1 terminal. The output audio is the audio signal from the
audio input terminal assigned to "Computer1" of the input source, and the audio
signal from the MIC terminal.
Output: Select this setting to output video and audio signals while the projector is in
standby.
No Output*: Select this setting not to output video and audio signals while the
projector is in standby.
Note
 When "Output" is selected for this setting, audio is output from the AUDIO
OUT terminal during standby, regardless of the projector's current "Option
Settings 2 3 Audio Out" setting.
 The video signal input to the projector's COMPUTER IN 2 terminal cannot
be output from the MONITOR OUT terminal.
Specify whether to display closed captions when projecting a video signal that
includes them.
Off*: Closed captions not displayed.
CC1, CC2, CC3, CC4: Indicates the current closed caption output setting (CC1,
CC2, CC3, and CC4).
Select the type of timer to be projected when the [TIMER] key is pressed.
Countdown*: Projects a countdown timer (page 52).
Presentation: Projects a presentation timer (page 54).
Display the countdown time setting screen (page 53) when "Countdown" is selected
for "Option Settings 2 3 Timer Type". If "Presentation" is selected, this menu item
shows the timer function menu (page 54).
Adjust the volume level of audio input from the MIC terminal within the range of 0*
(mute) to 3 (maximum).
Return all of the items in the "Option Settings 2" main menu to their initial defaults for
the currently projecting image source.
View information about the current wired LAN connection status.
View information about the current wireless LAN connection.
Specifies how an IP address is specified when the projector is connected to a
network.
Auto*: IP address is obtained automatically from a network DHCP server.
Manual: Manual IP address input.
When "Manual" is selected, settings for the following items can also be specified
manually: "IP Address", "Subnet Mask", "Default Gateway".
61