Basic Image And Audio Operations During Projection - Casio XJ-UT312WN User Manual

Basic Image and Audio Operations During Projection

To end the operations below, press the [ESC] key.
To do this:
■ XJ-UT Series
Correct vertical and
horizontal keystoning
manually (KEYSTONE)
■ XJ-F Series
Correct vertical keystoning
manually (KEYSTONE)
Zoom an image (D-ZOOM)
Momentarily blank the
image and mute the audio
(BLANK)
Freeze an image (FREEZE)
Auto adjust an image
(AUTO)
Perform this operation:
1. While there is no menu or dialog box displayed on the projection screen, press the
projector [] or [] key, or the remote controller [KEYSTONE +] or [KEYSTONE –]
key.
2. Use the [] and [] keys to correct vertical keystoning, and the [] and [] keys to
correct horizontal keystoning.
 Both vertical and horizontal keystoning can be corrected within a range of ±5°.
Using Projector Keys
1. After confirming that a menu or dialog box is not on the projection screen, press
the projector's [] or [] key.
2. Use the [] and [] keys to correct vertical keystoning.
Using Remote Controller Keys
1. Use the [KEYSTONE +] and [KEYSTONE –] keys to correct vertical keystoning.
Note
 You can correct this image within a range of ±30°.
 If "On" is selected for "Option Settings 1 3 Auto Keystone Correction"
(page 59), the projector will detect its vertical tilt and perform keystone
correction automatically.
1. Press the [D-ZOOM +] key to enlarge at the center of the projected image.
2. To zoom in on the center of the projected image more, press the [D-ZOOM +] key
again. To zoom out, press the [D-ZOOM –] key.
3. While an image is zoomed, use the [], [], [], and [] keys to scroll the view to
other parts of the image.
1. Press the [BLANK] key.
 This cuts off the image and audio from the input source, and projects the screen
specified by the Setup Menu "Screen Settings 3 Blank Screen" setting (page
58). If "Projection Off" is specified for the "Blank Screen" setting, the projection
light will turn off at this time.
2. To restore the image and audio, press the [BLANK], [ESC], or [P] key.
 Note that the [P] key can be used only when "Projection Off" is selected for the
"Blank Screen" setting.
1. Press the [FREEZE] key.
 This freezes the current input source image.
2. To return to the real-time input source image, press the [FREEZE] key again or
press the [ESC] key.
1. Press the [AUTO] key.
 This automatically adjusts the frequency and phase in accordance with the input
signal, which can reduce flickering and other projected image problems. This
operation is supported while the input source is Computer (RGB).
45