Casio XJ-UT312WN User Manual page 29

Component Video Connection
Video device component video output terminals are grouped as a set of three: Y, Cb, Cr or Y, Pb, Pr.
Connect the component video cable so the colors of its three plugs match the colors of the terminals
(green for Y, blue for Cb or Pb, red for Cr or Pr). If you want to output the audio of the video device
through the projector's speaker, you also will need to connect an audio cable.
Projector Terminal

COMPUTER IN 1*
or

COMPUTER IN 2

3
AUDIO IN 1*
or

AUDIO IN 2
*2 An XJ-F Series model has a COMPUTER IN terminal only.
*3 An XJ-F Series model has an AUDIO IN terminal only.
Composite Video Connection
Video device composite video output terminals are grouped as a set of three: video (yellow) and audio
(white and red). Use a video and audio RCA cable to connect to the like-colored terminals of the
projector.
Projector Terminal

VIDEO,
AUDIO IN R/L
Note
 The relationship between the image output terminal and audio output terminal can be
changed as required. Note that the combinations shown in the table are initial default settings.
For details, see "Relationship Between Image Input and Audio Input" (page 41).
Component video cable
2
15-pin Mini D-Sub
Stereo mini jack
RCA audio video cable
RCA jacks
Connection Cable
Audio cable
Connection Cable
29
Video Device Terminal
Component Video Out
terminals
Audio Out terminals
Video Device Terminal
Composite Video Out/
Audio Out terminals