Connecting A Wireless Adapter (Network Models Only); Logo Terminal (Firmware Updates, User Logo Transfers) - Casio XJ-UT312WN User Manual

Connecting a Wireless Adapter (Network Models Only)

Connecting the projector's wireless adapter* enables wireless connection to a computer or a smart
device, or to an existing wireless access point.
* The YW-41 wireless adapter may have been provided with your projector or may be available
separately. See "Unpacking" (page 20).
XJ-UT312WN, XJ-UT352WN
 XJ-UT312WN, XJ-UT352WN

Plug into the USB-A/DC 5V port or the
 XJ-F21XN, XJ-F211WN

Plug into the USB-A/DC 5V port.
For details about operations to use for wireless connection of the projector to a computer or a wireless
access point, and about operations after a connection is established, refer to the separate "Network
Function Guide".

LOGO Terminal (Firmware Updates, User Logo Transfers)

You can update the projector's firmware (software in the projector's flash ROM) using a computer
connected to the projector's LOGO terminal. You can also transfer user logo images from the
computer to the projector.
LOGO terminal
XJ-UT Series
Projector Terminal
LOGO
For information about operations after connection, refer to the documentation below, which is
available from the CASIO website.
Firmware updates : Projector Firmware Update Guide
User logo transfers : User Logo Transfer Guide
XJ-F21XN, XJ-F211WN

USB-A port.
LOGO terminal
XJ-F Series
Connection Cable
USB cable
USB Micro B
32
Computer Terminal
USB port