Ip Filter - CNET CWR-500 User Manual

7.2 IP filtering
Entries in this table are used to restrict certain types of data packets from your local
network to Internet through the device. Use of such filters can be helpful in securing
or restricting your local network.
Local IP Address: Enter the IP address the user wants to filter.
Protocol: TCP, UDP or both.
Comment: Explanatory notes.
To save all the settings, click "Apply Changes", the IP address, protocol and comment
will be listed in the "Current Filter Table".
If the user doesn't want to filter the IP addresses listed in the list, check "Selected"
and click "Delete Selected" or click "Delete All" to delete all filtered IP addresses.