Time Zone Settings; Lan Interface Setup - CNET CWR-901 User Manual

configuration. Click on "Next" to continue.

3.1.1 Time Zone Settings

The first step in Setup Wizard is Time Zone Settings. Users can synchronize the local clock to an
available NTP server. Enable NTP client update and select the correct Time Zone.
- Time Zone Select: Select the time zone of the country where this wireless router is
located.
- NTP server1: Default NTP server address (clock.stdtime.gov.tw) .
- NTP server2: NTP server 2 (time-b.nist.gov).
NTP server3: NTP server3 (time.nist.gov).
-
- Back: To skip current settings and go back to the last page.
- Next: Go to the next page.
- Reset: Click on "Reset" button to undo your changes.
Cancel: To skip the current settings and jump to the Status page.
-
- Help: To request help information.
After selecting the NTP server, click on "Next" button. LAN Interface Setup page is the next
screen.

3.1.2 LAN Interface Setup

In the LAN interface Setup page, users can change the LAN IP address and Subnet Mask of the
router. Most Users will not need to change these values.
- IP Address: Enter IP address for this wireless router.
13