Port Triggering - CNET CWR-500 User Manual

To save all the settings, click "Apply Changes", the application, IP address, protocol,
port range and comment will be listed in the "Current Port Forwarding Table".
If the user doesn't want to use any application listed in the list, check "Selected" and
click "Delete Selected" or click "Delete All" to delete all applications.

8.3 Port triggering

Entries in this table are used to for applications which need the multiple connections.
When the device detects trigger ports are used on internet outgoing traffics, it will
forward the incoming packet which port number is matched with the incoming port
range to the workstation, initiating the trigger packet.
Choose: Select the application the user wants to use.
Application: The selected application will be shown in this table.
Protocol: TCP, UDP or both.
Trigger Port: Trigger port range.
Incoming Port: Incoming port range.
Comment: Explanatory notes.
To save all the settings, click "Apply Changes", the application, protocol, trigger port,
incoming port and comment will be listed in the "Current Trigger Port Table".
If the user doesn't want to use any application listed in the list, check "Selected" and
click "Delete Selected" or click "Delete All" to delete all applications.
Note: Only IRDC, Windows Media Service and VoIP H.323 can work.