8 Port Mapping
Entries in this table allow you to automatically redirect common network service to a
specific machine behind the NAT firewall. These settings are only necessary if you
wish to host some sort of server like a web server or mail server on a private local
network behind your Gateway's NAT firewall.
8.2 Port forwarding
Entries in this table allow you to automatically redirect common network services to a
specific machine behind the NAT firewall. These settings are only necessary if you
wish to host some sort of server like a web server or mail server on the private local
network behind your NAT firewall.
Choose: Select the application the user wants to use.
Application: The selected application will be shown in this table.
IP Address: Enter the IP address that the user wants to forward. Note that the address
must be in the same domain of your local computer IP address.
Protocol: TCP, UDP or both.
Port: Enter the port range the user wants to forward.
Comment: Explanatory notes.