Save/Reload Settings; Upgrade Firmware - CNET CWR-500 User Manual

5.1 Save/reload settings

It allows the user to save current settings to a file or reload the settings from the file
which was saved previously. Besides, the user could reset the current configuration to
factory default.
Save Settings to File: The user can save the current settings.
Load Settings from File: The user can reload the settings from the file which was
saved previously. After browsing to the file, click "Upload", and the settings will be
reloaded.
Reset Settings to Default: the user could reset the current configuration to factory
default.

5.2 Upgrade firmware

It allows the user to upgrade the device firmware to new version. Make sure that the
firmware the user wants to upgrade is on the local hard drive. After browsing to the
file, click "Upload", and the firmware will be upgraded. Please note, do not power off
the device during the upload because it may crash the system.
After the firmware is uploaded, it will show as following, then click "OK" to finish
the upload.