Dipswitch Settings - Magnetek Flex 4EX2 Instruction Manual

4.2.3

Dipswitch Settings

4.2.3.1 Interlocked Pushbutton Pair
Interlocked means any pushbutton pair cannot be pressed simultaneously as each
press will cancel the other out. Interlocked setting usually applies to electric motor's
forward and reverse motion and ON and OFF switches. Each dipswitch on the
decoder board corresponds to a pushbutton pair.
4EX2:
PB1 2
ON
S1 DIP 1~10
6EX2:
PB1 2 PB3 4
ON DIP
S1 DIP 1~10
Dip
Settings
00000
00001
00010
00100
00101 the START button and then press the ON or OFF pushbutton to activate
00110
00111
01000
01001
01010
01011
* External warning function requires installing an external warning device such as horn or lights to the K10
Function output relay.
PB3 4
DIP
ON
PB5 6
ON DIP
ON
S2 DIP 1~5
3 output relays Closed/Closed relay action at 2nd speed (shared 2nd
On (right button) & Off (left button)
On (right button) & Off (left button)
(EMS → all relays deactivate when STOP button is pressed)
On + Start/Off + Start - For added safety, you must first press and hold
(EMS → all relays deactivate when STOP button is pressed)
Single speed + External warning*
3 output relays Closed/Closed relay action + External warning*
3 output relays Closed/Closed relay action + Brake
3 output relays Closed/Closed relay action + Brake + External warning*
DIP ON DIP
DIP ON DIP
Function Descriptions
Single speed only
speed output relay)
the output relay.
FWD/REV toggled
FWD/REV toggled
Flex 4EX2 / 6EX2 MRX CE Instruction Manual
November 2018
Page 29 of 44