Table of Contents
Advertisement
Quick Links
Urban Tallboy
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B1
30mm
bolt &
50mm
nut x48
screw x8
screw x12
E
F
E3
E4
E1
E2
dowel
slide
x8
rail x10
L
K
wall
wall
anchor x2
strap x2
Hardware Supplied
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
B2
C1
C2
18mm
12mm
screw x10
screw x80
G
H
I
wedge
feet
25mm
x10
x4
screw x5
N
O
M
cover
bracket
12mm
x10
x10
screw x10
WARNING:
Any furniture that is not anchored to a wall has the potential to tip over in
D
certain circumstances, i.e. if a child attempts to climb up on the furniture or in the event
of an earthquake. Accordingly, we recommend that all furniture is anchored to a wall.
We supply a free safety wall anchor with all furniture sold and we recommend these
are used to prevent your product tipping. The fixing device provided should fit most
wall types, but please note that different wall materials may require different fixing
devices from those supplied.
50mm
screw x24
J
14mm
screw x6
P
stopper
x10
Phillips & Flathead screwdrivers required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
1
Advertisement
Table of Contents
Related Manuals for Mocka Urban Tallboy
Summary of Contents for Mocka Urban Tallboy
- Page 1 *We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use. use of a power drill on a low-speed setting. Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 2 Attach 4x feet (H) to the ends of the side leg panels as shown. Attach the centre panels to the side leg panels using 12x 30mm screws (B2). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 3 Attach 10x brackets (N) to panels [3] and [4] using 40x 12mm screws with a screwdriver. (C1) and tighten with a screwdriver. Slide 10x covers (M) over the brackets as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 4 2x bolts (A). Attach 5x slide rails (E3) to panel [4] using 10x with a screwdriver. 12mm screws (C1) and insert 2x bolts (A). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 5 Attach metal support bar to panels [3] and [4] and secure with 4 x screws (J). Tighten with a screwdriver. mocka.co.nz | mocka.com.au mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 6 Attach 4x bolts (A) to the underside of panel [1]. locking nuts (A). Attach metal support bar to panel [1] and secure with 3 x screws (I). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 7 6x bolts (A). Attach panel [6] to panels [7], [8] and [10] using 6x locking nuts (A). Attach 1x slide rail (E2) to panel [7] and 1x slide rail (E4) to panel [8] with 4x 12mm screws (C1). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 8 (J). Fasten to wall using 2x wall anchors (K) and 2x wall screws (I). Ensure unit is balanced and steady before use. You’re done, enjoy! furniture into place, do not drag. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
Need help?
Do you have a question about the Urban Tallboy and is the answer not in the manual?
Questions and answers