Advertisement
Quick Links
Jolt Tallboy
ASSEMBLY INSTRUCTIONS
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B
C
locking nut
x17
dowel
bolt
x34
x17
G
H
small screw
x60
L + R
x12
Hardware Supplied
Phillips & Flathead screwdriver and hammer required
mocka.co.nz | mocka.com.au
E
F
D
small
locking nut
long screw
x28
x33
small bolt
x28
I
J
K
plastic glides
x4
small nail
L + R
x22
x12
W
safety strap
screw
x1
x1
X
Y
wall
r/washer
anchor
screw
x1
x1
Z
washer
x2
Wall Strap
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
WARNING:
Any furniture that is not anchored to a wall has the
potential to tip over in certain circumstances, i.e. if a child
attempts to climb up on the furniture or in the event of an
earthquake. Accordingly, we recommend that all furniture is
anchored to a wall. We supply a free safety wall anchor with all
furniture sold and we recommend these are used to prevent
your product tipping. The fixing device provided should fit most
wall types, but please note that different wall materials may
require different fixing devices from those supplied.
1
Advertisement
Related Manuals for Mocka Jolt Tallboy
Summary of Contents for Mocka Jolt Tallboy
- Page 1 Jolt Tallboy ASSEMBLY INSTRUCTIONS Thank you for your purchase. Please follow the instructions below for correct assembly. WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
- Page 2 Jolt Tallboy ASSEMBLY INSTRUCTIONS To begin assembly attach 5x slide rails (H) in place on each Screw bolt (A) into hole in part [6]. Slot together with part [4] of the panels [2] and [3] and to both sides of panel [4] using using 1x locking nut (B) and tighten with a screwdriver.
- Page 3 Jolt Tallboy ASSEMBLY INSTRUCTIONS Screw bolts (A) and insert dowels (C) into corresponding holes in panels [2] and [3]. Slot together with parts [5], [6], [7], [8], [9], and [10]. Place 10x locking nuts (B) into holes in connecting parts and tighten with a screwdriver.
- Page 4 Jolt Tallboy ASSEMBLY INSTRUCTIONS connector Insert 4x bolts (A) and 6x dowels (C) into top panel [1]. Connect back panels [11] together with the connector stick Slot together with the rest of the cabinet. Place 4x locking [12]. Attach both panels to the cabinet using 22x nails (K) along the nuts (B) into top holes and tighten with screwdriver.
- Page 5 Jolt Wardrobe Jolt Tallboy ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS Small Drawers (x2) Small Drawers (x2) 13 / 14 Assemble the drawers by screwing 4x bolts (E) into the front panel Slide the base panel [17] into place in the grooves in [13]/[14].
- Page 6 Jolt Tallboy ASSEMBLY INSTRUCTIONS Small Drawers (x2) Small Drawers (x2) Fasten back panel [18] into place using 4x long screws (D) Flip drawer over and attach 2x rail components (I) to both in the holes in the side panels. left and right underside of the drawer using 4x screws (G).
- Page 7 Jolt Tallboy ASSEMBLY INSTRUCTIONS Large Drawers (x4) Large Drawers (x4) Assemble the drawers by screwing 4x bolts (E) into the front Slide the base panel [20] into place in the grooves in panel [19]. Attach to side panels [15] and [16] using 4x locking side and front panels.
- Page 8 Jolt Tallboy ASSEMBLY INSTRUCTIONS Large Drawers (x4) Large Drawers (x4) Fasten back panel [21] into place using 4x long screws (D) Flip drawer over and attach 2x rail components (I) to both in the holes in the side panels. left and right underside of the drawer using 4x screws (G).
- Page 9 Jolt Tallboy ASSEMBLY INSTRUCTIONS Slide all completed drawers into place on the rails Ensure all drawers easily slide open and in the cabinet. When placing the top two drawers in place, ensure the closed. panel [13] drawer front is on the left side and the panel [14] drawer front is on the right.
- Page 10 Attach the safety strap (W) to the top of the back side of the Mocka Move Mocka Set into desired location up against wall. Use a drill Set using screw (Y) and washer (Z). Tighten with a screwdriver. Once to create a small hole lining up with the top of the safety strap (W).
Need help?
Do you have a question about the Jolt Tallboy and is the answer not in the manual?
Questions and answers