Table of Contents
Advertisement
CE declaration of conformity
The company AAT Alber Antriebstechnik GmbH hereby declares that the s-max sella complies with the
relevant provisions of EC Directive 2006/42/EC, 2007/47/EC and 93/42/EC. If any alteration is made to
s-max sella without the prior agreement of AAT Alber Antriebstechnik GmbH, this declaration shall no
longer be valid. This statement is valid only for the products with the following article numbers: 300696
and 300693.
The products are marked with
in accordance with the legal guidelines.
The technical documentation is stored for inspection by the responsible authority for at least fi ve years
at the above address. A system for market observation is implemented.
Manufacturer's signature:
Martin Kober
(Managing Director)
.
WARNING
Failure to observe this user manual, in particular the safety instructions, can lead to defects in the
s-max sella and endanger the operator, the occupant or persons in the device's immediate vicinity
! There is an increased risk of injury! In the event of an infringement, claims for warranty and liability are
excluded!
The product is state of the art and complies with the associated technical safety requirements.
Nevertheless, a low level of residual risks cannot be ruled out. Please observe the safety instructions
to this end.
People with visual and reading impairments or intellectual disabilities should print out the user manual
available on the website in enlarged letters or have this manual read to them, if necessary. You will also
fi nd all safety-relevant changes that have been made to the user manual on our homepage. All versions
with details of the production period of the product are obtainable at:
www aat-online de/de/bda/s-max-sella
3
Advertisement
Table of Contents
