Specification - ABB AW101 Instruction Manual

Water Hardness Analyzer
AW101 Testomat

11 Specification

Ranges
Determined by reagent – see Table 1.1 on page 2)
Alarms
Three relay outputs –
Limit values (LV1, LV2) and one fault alarm
Resistive load 4 A
Alarm displays
The following faults are shown on the display and also activate the
Alarm output:

Low water pressure

Function fault optics

Measuring fault analysis

Function fault dosing pump

Function fault outlet to drain

Reagent low level

Measuring fault dirtiness

Measuring fault turbine meter

Measuring range exceeded
Front panel indicators
Programme in operation
Analysis stopped
Lack of reagent
Satisfactory result
Unsatisfactory result
Viewing window
Outputs
Current output
0 to 20 mA or 4 to 20 mA
Max. load 500
EMC
Conformity
EN50081-1, EN5008-2, EN61010-1
Power Supply
Voltage
115 V, 230 V or 24 V AC ±10%, 50/60 Hz
Power consumption
30 VA
Unit Protection
115 V, 230 V: T 0.1 A
24 V:T 1.0 A
20
Environmental Data
Sample pressure
0.1 to 3 bar (1.5 to 45.5 psi)
Sample temperature
10 to 40 °C (41 to 104 °F) max.
Ambient temperature
10 to 45 °C (41 to 124 °F)
Mechanical Data
Ingress protection
IP65
Dimensions
380 x 459 x 280 mm (15 x 18.8 x 11 in.)
Weight
9 kg (19.8 lbs)
Consumables
Reagent consumption
0.07ml (0.000123 pint) per test
11 Specification
DS/AW100-EN Rev. E
IM/AW101 Rev. C