Section 4: Barcode Scanner
Out-of-Box Settings
Out of the box the default settings of the barcode reader are as follows:
•
USB VCP (Virtual COM Port)
•
Presentation Mode
Illumination always on
o
•
Most common barcodes enabled
•
Beep on successful scan
This section covers procedures to set barcode settings and configurations.
Note: Not all available configurations are covered herein. For complete list, refer to N3680 User Guide
from www.honeywellaidc.com.
User Manual – PayPoint Plus for Windows
UM600523 Rev.A, page 22 of 41