Elo Touch Solutions PayPoint Plus for Windows User Manual page 24

Illumination Settings
The above setting is the default for the scanner. The white illumination light will be on at all times.
Scanning the above barcode will disable the white illumination light when the scanner is not in use.
Trigger Mode Settings
Out of the box the default of the scanner will be presentation mode (always on). The reader will be
scanning for barcodes at all times.
Manual Trigger mode:
Scanning the above barcode will enable manual trigger mode. When in this mode, the scanner will need
to be activated manually (by software or hardware button) between each scan.
Presentation Mode (default setting):
User Manual – PayPoint Plus for Windows
UM600523 Rev.A, page 24 of 41