Section 4: Common Barcode Configurations
Out-of-box Settings
Out of the box the default settings of the barcode reader are as follows:
•
Presentation Mode
•
Illumination always on
Red aimer will turn off between reads
o
Most common barcodes enabled
o
•
Beep on successful scan
This section covers procedures to set barcode settings and configurations.
Note: Not all available configurations are covered herein. For complete list, refer to N3680 User Guide from
User Manual – PayPoint Plus for iOS
www.honeywellaidc.com
UM600186 Rev A, page 19 of 48