9. Operation Test and Appearance check
Operation Check
Set 30 rivets of 8 size steel to check:
The tool does not slip
Rivet setting is done in one stroke
There is no protruding mandrels
There is no abnormal noise
The next rivet introduced to the front of the
tool is inserted smoothly.
The jaws do not bite
The waste mandrel is ejected to the
Collector
The collector shutter operates normally
(Open → Close)
Appearance check
Any scratches on the housings
Loose components and screws
Any oil spots on the housings
Peeling of the outer mold (Rubber grip)
Memo
26