Operation Test And Appearance Check - Stanley PB3400 Service Manual

11. Operation Test and Appearance check

Operation Check
Set 30 rivets of 8 size steel to check:
 The tool does not slip
 Rivet setting is done in one stroke
 There is no protruding mandrels
 There is no abnormal noise
 The next rivet introduced to the front of the
tool is inserted smoothly.
 The jaws do not bite
 The waste mandrel is ejected to the
Collector
 The collector shutter operates normally
(Open→Close)
Appearance check
 Any scratches on the housings
 Loose components and screws
 Any oil spots on the housings
 Peeling of the outer mold (Rubber grip)
Memo
37