Table of Contents
Advertisement
M A I N T E N A N C E
The hood-fan should provide many
years
of
trouble
provided it is maintained properly.
Cleaning the Filter
Clean the grease filter either by
carefully hand washing, (so as not to
damage
the
filter
preferabl y
in
a
Depending on use, the filters should
be cleaned at least every two weeks
in a dishwasher.
If a carbon filter has been fitted this
must be replaced at least every 6
months as a minimum. Depending
on cooking style and nature of
cooking (greasy foods, fry's, curries
etc) would probably require more
frequent replacement – if odors start
to
manifest
themselves
cooking it is time to replace the
carbon filter . We suggest you retain
a spare set. These can be ordered
from the supplier of your range
hood.
Cleaning the Hood
Cleaning of the internal parts should
be done with a clean damp (not
excessively wet) cloth together with
regular household detergent. The
external stainless steel elements
should be cleaned with a good
quality foaming
stainless
cleaner. Read the manufacturers
directions. Generally they recomend
that the foam be sprayed onto a
clean dry cloth and then applied to
the stainless steel. Allow the foam to
react on the surface for a few
minutes and then wipe with a clean
dry cloth.
7
On the surfaces that are exposed
directly to heat from the cook-top, it
free
service
is advisable to clean these on a
regular basis to avoid the marks
from becoming baked on.
Do not under any circumstances use
an abrasive type cleaner as this will
scratch and damage the stainless
design)
or,
steel finish. Glass
dis hwas her.
should be cleaned with a product
such as Windex.
Light Bulb Replacement
Turn blower and lights off.
sure the lights are cool.
If new lights do not operate, check
fuses and be sure globes and
breakers are inserted correctly.
when
Do not remove the entire fixture
(socket) as this is very difficult to
reinstall. Gently pry the bulb from the
fixture using a soft instrument such
as a toothpick.
will scratch the surface (refer to
figure 2).
Replace the appropriate bulb. Check
parts
steel
Figure 2
glass whilst it is out. Re-insert the
glass-blocking ring and fasten it.
components
Steel instruments
brochure
or
specification
sheets on our website.
Wipe both sides of the
Make
Hide quick links:
Advertisement
Table of Contents
