Description Of Dip Switches - Brother LH4-B800E Service Manual

6. ELECTRIC MECHANISM

6-5. Description of DIP switches

6-5-1. Panel DIP switches
DIPSWA
No.
ON Presser foot remains lowered after sewing is complete (lifts when pedal is depressed)
1
OFF Presser foot lifts after sewing is complete
ON
2
OFF
ON Emergency stop using presser foot lifter switch enabled during automatic sewing
3
OFF Emergency stop using presser foot lifter switch disabled during automatic sewing
ON Display setting during automatic mode = lower thread counter (Default: 100)
4
OFF Display setting during automatic mode = production counter (Default: 0)
ON 2-cycle sewing ON
(All programs will be set to 2-cycle sewing regardless of the setting for parameter
5
No. 55.)
OFF 2-cycle sewing OFF
ON
6
OFF
ON Upper thread breakage detection disabled
7
OFF Upper thread breakage detection enabled
ON Programs disabled
8
OFF Programs enabled
6 - 22
1. Slide the panel side cover to open it.
2. Change the DIP switch setting.
• Refer to the DIP switch table for an explana-
tion of the functions of each DIP switch.
A 3. Slide the panel side cover downward to close it.
NOTE:
Turn the power off before changing the DIP switch set-
tings.
If the settings are changed while the power is still on,
they will not take effect.
B
Setting item
LH4-B800E
Default
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF