Brother LH4-B800E Service Manual page 51

2. DISASSEMBLY
Oil terminal mechanism
!6
Remove the screw q, and then remove the cap w and the felt @ 5 .
Remove the screw o, and then remove felt base A r from the wick base support i.
Remove the screw e, and then remove the wick base support i.
Remove the two screws ! 4 , and then remove the oil terminal ! 5 from the wick base support i.
Remove the oil tube ! 6 that is connected between the oil terminal and the oil outlet from the tube support ! 7 .
Remove the screw ! 8 , and then remove the tube support ! 7 from the wick base support i.
Remove the oil tube !6 that is connected between the oil terminal and the oil outlet from the wick base support i.
Disconnect the oil tube !9 that is connected between the oil terminal and the oil outlet from the oil terminal !5 .
Disconnect oil pipe B @ 0 from the oil terminal ! 5 .
Remove the oil cap @ 1 , and then remove the packing @ 2 from the oil terminal ! 5 .
Remove the collar @ 3 and the wick @ 4 from the oil terminal ! 5 .
2 - 26
w
q
@5
e
i
o
e
r
!4
!5
i
!7
LH4-B800E
i
!7
!8
!5
!6
!5
!9
@0
@4
@3
@1
@2
!5