Brother LH4-B800E Service Manual page 156

DIPSWB
No.
ON
1
OFF
ON
2
OFF
Work clamp size: 7.3 × 75 mm (6.0 × 70 mm)
ON, ON, ON
Work clamp size: 7.3 × 36 mm (6.0 × 32 mm)
ON, ON, OFF
Work clamp size: 7.3 × 24.5 mm (6.0 × 20 mm)
ON, OFF, ON
3, 4, 5
Work clamp size: 6.8 × 36 mm (5.4 × 32 mm)
ON, OFF, OFF
Work clamp size: 6.8 × 24.5 mm (5.4 × 20 mm)
OFF, ON, ON
OFF, ON, OFF Panel DIP switches B-7 and B-8 are enabled.
Work clamp size: 5.4 × 19 mm (4.0 × 15 mm)
OFF, OFF, ON
OFF, OFF, OFF Panel DIP switches B-7 and B-8 are enabled.
ON Needle plate size: 5.4 mm (Max. needle zigzag feed width = 4.0 mm)
6
OFF Needle plate size: 7.3 mm (Max. needle zigzag feed width = 6.0 mm)
Work clamp size: 7.3 × 47 mm (6.0 × 40 mm)
ON, ON
Work clamp size: 6.8 × 47 mm (5.4 × 40 mm)
ON, OFF
7, 8
Work clamp size: 5.4 × 24.5 mm (4.0 × 20 mm)
OFF, ON
Work clamp size: 5.4 × 36 mm (4.0 × 32 mm)
OFF, OFF
* If the programs are initialized when Nos. 3, 4 and 5 are set to OFF, OFF and ON (work clamp size 5.4 x
19 mm [4.0 x 15 mm]) respectively, the initial value for parameter No. 02 - Cutter size will be set to 6.0.
Setting item
LH4-B800E
6. ELECTRIC MECHANISM
Default
OFF
OFF
OFF, OFF, OFF
OFF
OFF, OFF
6 - 23