Cutter Mechanism - Brother LH4-B800E Service Manual

1. MECHANISM DESCRIPTION

1-6. Cutter mechanism

1. When a cutter ON signal is input, the cutter solenoid q operates.
2. A cutter link bracket w is secured to the end of the plunger, and it turns the cutter driving arm r via the cutter
driving link e.
3. The cutter driving link t that is secured to the end of the cutter driving arm r is moved up and down.
4. The driving shaft holder assembly y is linked to the cutter driving link t, and this causes the cutter driving shaft
u that is connected to the driving shaft holder assembly y to move up and down.
1 - 6
u
t
y
LH4-B800E
e
w
r
q